Sump Pumps

SR Series VS
Enlarge
SR Series VS
  • Flow Chart SR33 VS
  • SR33 Side View Bracket Diagram
  • SR Series VS
 
  • Flow Chart SR33 VS
  • SR33 Side View Bracket Diagram
  • SR Series VS

SR Series (Discontinued)

  • Cast-aluminum body/durable nylon cover with polypropylene volute
  • Available pump: ⅓ HP
  • Energy-efficient permanent split capacitor (PSC) motor
  • Premium pump construction
        -  Built-in vertical switch
        -  Upper and lower sealed ball bearings
        -  Stainless-steel fasteners for long life
        -  Carbon/ceramic plus  (1) Buna-N-Seal shaft seals
        -  10-foot power cord
  • Will fit in 10-inch diameter sump pit
  • SR Series Energy Savings: Average $62 per year
  • 18-month warranty

Where to buy

 

*Based on an average sump pump runtime of 5 minutes per hour for 1 year. The estimated average of a ⅓ HP shaded pole motor is 9.5 Amps. Average electric cost per-kilowatt-hour is $0.12.

Specifications

  SR33-VS
Motor - HP 1/3 HP
Flow @ 10 ft. GPH (3 M.) 2,820 GPH
Flow @ 10 ft. GPM (3 M.) 47 GPH
Max. Head 24.6' / 7.5 m
Pump Discharge 1.5" 3.8 cm
Amps. @ 10 Ft. Total Head 3.3 Amps
Weight 12.2 lbs. / 5.5 kg
Width 8” / 20.3 cm
Depth 6” / 15.2 cm
Height 12.5” / 31.8 cm

Pump Construction

Pump Diagram Pump Components
AC_pump_cutout_drawing_SR33_with_numbers 1.  Permanent split capacitor (PSC) motor increases energy efficiency
2.  Cast aluminum body/durable nylon cover
3.  Non-corrosive polypropylene strainer
4.  Upper and lower sealed ball bearings
5.  Thermally protected
6.  Carbon ceramic shaft seals plus (1) Buna-N seal
7.  1-1/2" outlet
8.  Engineered polymer impeller