Backup Pumps

1850_2017
Enlarge
1850_2017
  • Backup Sump Pump PHCC-1850_360
  • 1850_Side_view_SMALL
  • Dual Float
  • Flow Chart 1850
  • PS_web_-_PHCC-1850_controller
  • 1850_2017
 
  • Backup Sump Pump PHCC-1850_360
  • 1850_Side_view_SMALL
  • Dual Float
  • Flow Chart 1850
  • PS_web_-_PHCC-1850_controller
  • 1850_2017

Pro Series 1850

FEATURES AND BENEFITS:

Model PHCC-1850
  • 1,850 GPH at 10 ft. lift
  • 12-volt DC sump pump with decades of proven reliability
  • Dual float switches for added reliability
  • Automatically switches to battery power when AC fails
  • Remote monitoring capability with additional Pro Series CONNECT Modules allow you to receive real time alerts
  • USB data port and remote terminals connect to external devices such as the Pro Series CONNECT Module, home automation systems or other devices for remote notification
  • Backup will assist primary pump if excessive amounts of water are entering the sump pit
  • System pumps intermittently for days
  • Automatically switches to battery power when AC fails
  • Recharges battery automatically
  • Designed for use with wet-cell or maintenance-free batteries
  • Accommodates up to two (2) B-2200 batteries for 100 hours of pumping (Based on 10% duty cycle; run times may vary based on inflow of water.)
  • 3-year warranty

 PDF_download_icon_v2 PHCC-1850 Brochure

Controller Features: 

  • Unique monitoring controller detects irregularities of pump and power conditions
  • Sounds and alarm, pinpoints problems and solutions on the control panel
  • Receive notifications about your Pro Series pumps and backup sump pump system while away from home using a Pro Series CONNECT module
  • Alarm can be silenced during a power outage
  • Tests pump weekly to exercise and extend pump life

Specifications

  PHCC-1000 PHCC-1850 PHCC-2400
Flow @ 10 ft. GPH (3 M.) Head 1,000 GPH 1,850 GPH 2,400 GPH
Amps @ 10 ft. Total Head 6.5 Amps 10 - 12 Amps 20 Amps
Outlet 1.5" PVC adapter 1.5" PVC adapter 1.5" PVC adapter
Voltage 12 VDC 12 VDC 12 VDC
Power Input 115VAC, 60 Hz 115VAC, 60 Hz 115VAC, 60 Hz
Charger Strength Voltage/Current 12 VDC / .4 Amps 12 VDC / 1.6 Amps 12 VDC / 13 Amps
Motor Type DC DC DC

Controller Comparison

  PHCC-1000 PHCC-1850 PHCC-2400
Will sound alarm indicating:      
 - Battery needs water Dot Dot Dot
 - Battery is old and needs to be replaced Dot Dot Dot
 - Battery is discharged Dot Dot Dot
 - Cable is loose or terminals are corroded Dot Dot Dot
 - Power, fuse or circuit breaker has failed Dot Dot Dot
 - Pump has been activated; Check the main pump for failure Dot Dot Dot
The alarm can be silenced during a power outage Dot Dot Dot
Automatically test pump weekly   Dot Dot
USB Data Port (Ability to remotely notify which alert has activated or what specific maintenance might be needed)   Dot Dot
Remote Terminal (Ability to remotely notify of a problem or needed maintenance)   Dot Dot
Can accommodate similar standby batteries to extend the run time   Dot Dot
Backup pump runs off AC power as well as battery power     Dot
Displays percentage of power remaining in the battery     Dot

Remote Notification

The Pro Series CONNECT Line of Pumps have the ability to send email or text notifications when there is an issue or needed maintenance.

Notification with the USB Data Port:

  • With USB data port simply plug/attach the Pro Series CONNECT Module to your Pro Series 1850 Backup system and the module will act as a gateway to the internet
    • Receive specific text or email alerts telling you exactly what is going on in the home

Notification with the Remote Terminal

  • Connects to a home security, auto dialer, or other dry contact based device
    • Receive text or email alerts, notifying you of an issue or needed maintenance

Now, you can ‘be in-the-know when you’re on-the-go’.

Pumping Time*

  PHCC-1000 PHCC-1850 PHCC-2400
B-1000 50 Hours Not Recommended Not Recommended
B-2200 100 Hours 60 Hours 50 Hours
(Two) B-2200 Not Recommended 120 Hours 100 Hours
B12-90 100 Hours 60 Hours 50 Hours

* Run time based on 10% duty cycle. Run times may vary based on water flow.

Construction and Included Components

Pump Housing Non-corrosive ABS
Impeller Fiber filled polycarbonate
Shaft Material Stainless steel
Float Switch Caged dual float, Micro-reed Switches
Pump Dimensions
(W x D x H)
9.0” x 5.0” x 7.5”
(22.9 x 12.7 x 19.1 cm)
Shipping Weight 12.0 lb (5.4 Kg)

Included with System

  • 12 VDC sump pump
  • Control unit with fluid sensor
  • Dual float switch
  • Snap-on non-corrosive screen
  • 1-1/2" Pipe adapter
  • Battery cap that accommodates fluid sensor
  • Battery box